A border shape. Drag selection handles to manually change size.
A border that resizes to fit the page. Drag selection handles to manually change size.
Move to change feature size.
dddddd
A title block. Select and type to enter text. Right-click to automatically size the shape.
ddddd
Basic frame around drawing.
utomatically snaps to page size. Move corner control handles to limits of print margins.
Resize Bottom/Left Margin
Resize Top/Right Margin
Typical title block for small paper sizes.
size paper.
12/1"
esc(0)
1
1'-0"
12"
1in
Mechanical 1 : 1
:
Architectural 12" = 1'-0"
Civil 1in = 1in
Metric 1 : 1
Textbox with field label on left and field on right. Select and type to edit field.
Double-click to edit field label.
0 = top-bottom, 1 = side-side
Label Above
Circle defined by diameter. Adjustable eccentricity allows for ellipse.
to an ellipse.
Change Curvature
Vertical dimension line with variable dimension line height & text positions.
itions.
0;0FT 0IN;0.0FT;0IN;0FT;0MI;0 MM;0 CM;0 M;0 KM
Linear Precision Formatting String
0=Dwg, 1=Arch, 2=Dec Ft, 3+ = other
Change Dimension Height
Reposition Text
0.00
1.00
Use Drawing Page's Units;.Feet-Inch (1'-0");.Feet (1.00');.Inches;.Feet (1.00ft);.Miles;-Millimeters;-Centimeters;-Meters;-Kilometers
Use Drawing Page's Units
Don't Show Units
Place endpoint at arc center, control handle on arc. Right-click to hide/show cross-hairs.
f arc.
f the arc.
Place On Circle
Hide Crosshair
Hide the crosshair.
_Hide Crosshair
0.50
0
Vertical dimension line with text outside extensions with variable dimension line & text positions.
Horizontal dimension line with variable dimension line & text positions.
Centerline.
handles to change length of centerlines.
Scratch.A1 changes size of middle crosshair.
Reposition Lower-Left of Crosshairs
Reposition Upper-Right of Crosshairs
Place 1-D endpoints on baseline & 1st feature, up to 4 vertical baseline dimensions.
up to 4 vertical baseline dimensions.
Reposition 2nd Dimension Line
Reposition 3rd Dimension Line
Reposition 4th Dimension Line
Change Line Spacing
Horizontal dimension line with text outside extensions with variable dimension line & text positions.
xt position.
Press Tab before each text field to match division spacing .
t. Press Tab before each text field to match division spacing .
Change Column Spacing
Text block with centered text. Use as a header/label for a section of a parts list, revisions block, or title block.
tle block.
Automatically reads out the scale of the page.
Textbox with field label on top and field below. Field automatically reflects foreground drawing's page number.
Label At Left
Handle controls width of text box, height sizes with text.
Move control handle to change bend location.
Reposition Bend
Show Box
Line that extends beyond endpoint handles. Useful for creating shapes using the Fragment operation.
Reposition Endpoint
Hide Control Handles
Generic circle with text and connection points.
on points.
Adjust height to get 1-5 lines. Use for parts lists, title blocks, bill of materials, etc.
e blocks, bill of materials, etc.
ck sections, etc.
s, etc. Control handle changes line spacing size.
Adjust Line Spacing
Rectangle.
with text and connection points. Can be stretched to any dimensions.
Circle defined by 3 points.
g 3 points.
red circle. Double-click to show alignment box.
t box.
ment box.
Reposition Perimeter Point
Show Alignment Box
Arc defined by 3 points.
esired arc.
les.
Circle or ellipse with connection points and text that stays level when shape is rotated.
circle,basic
Drag the shape onto the drawing page.
lly by dragging any selection handle.
box,rectangle,basic
customized by dragging any selection handle.
vertical,dimension,engineering,measure,measurement
Drag onto the page, then drag the line ends to blue x's on the shape to be measured. Right-click for more options.
Use Drawing Page's Units;Feet-Inch (1'-0");Feet (1.00');Inches;Feet (1.00ft);Miles;Millimeters;Centimeters;Meters;Kilometers
diameter,outside,dimension,engineering,measure,measurement
Drag to add a dimension to an arc or circle. Place line end at arc center, and yellow diamond on arc.
he arc.
_H&ide Crosshair
centerline,dimension,engineering,measure,measurement
Drag onto the page to indicate the centers of circles and arcs, and to represent symmetry.
sshair.
vertical,baseline,dimension,engineering,measure,measurement
Drag onto the page to add up to 4 baseline dimensions. Drag one line end to baseline and one to first feature.
dimensions.
triangle,basic,right
at can be customized by dragging any selection handle.
horizontal,dimension,engineering,measure,measurement
Square,box,basic
stomized by dragging any selection handle.
Horizontal,outside,baseline,dimension,engineering,measure,measurement
sition.
rounded,square,box,basic
ding.
orners on square.
Adjust Corner Rounding
circle,center,drag
Drag onto the page, then resize by dragging either end of the radius.
ength of radius.
ith stamp tool!
p tool.
0.375
0.000
2.75
8.25
11.00
5.50
1.25
0.625
2.25
1.625
20.50
1.750
0.813
0.125
@+
A
Chainplates
@
Backstay
4in.
Civil 1in = 4in.
3"
4
Architectural 3" = 1'-0"
Metric 1 : 4
1/4
Mechanical 1/4 : 1
Chainplates.vsd
Project Photos
1.500
1.3750
0.0000
7.1250
24.0
0.0
23.0
0.5313
1.2500
Intermediates & Lowers
7.0000
2.00
2.500
2.000
Covers
1in.
Civil 1in = 1in.
3.75
3.25
3.625
2.375
2.875
2.5
2.0
0.25
0.38
0.188
1.188
1.438
1.125
C:\Program Files\Microsoft Office\Visio11\1033\PTSCLD_U.VSS
C:\Program Files\Microsoft Office\Visio11\1033\ANNOT_U.VSS
C:\Program Files\Microsoft Office\Visio11\1033\BASIC_U.VSS
C:\Program Files\Microsoft Office\Visio11\1033\DIMENG_U.VSS
C:\Program Files\Microsoft Office\Visio11\1033\DRAWTL_U.VSS
Guide
TheDoc
DXF IMAGES
Gesture Format
Border Dark
Visio 20
Border small
Border Graduated
Visio 13
Border triangles
Margin
PageMargin
AntiScale
Border Annotation
Visio 21
Border Text Transparent Center
Border Text Transparent Left
Visio 70
Border graphic 2
Title block deco
Frame
Block
Block label center
Block label left
Title block small
ScaleType
PageScale
DrawingScale
ArchLeft
CivERight
MetricLeft
MetricRight
MELeft
Block - side label
BoxType
SizeFactor
Hairline
Circle - diameter
5 ruled column
Center drag circle
Circle: 3pt.
Arc: 3pt.
Dimension
Vertical
LPrec
LUnits
ShowUnits
LUnitsFactor
FormatString
LengthText
Length
LPFString
LPrecInd
LPrecVal
LUnitsInd
LUnitsVal
ShowUnitsInd
ShowUnitsVal
FeetInch
Feet
Inch
InchPrec
LocEndX
LocEndY
visObjectType
DrawingUnitFactor
Extensions
Angle
Vertical.10
Aft Chainplate
Horizontal outside
EE Normal
Diameter outside
Diameter outside.15
Horizontal
Vertical outside
Harken B502 Specs
Centerline
Vertical baseline
Length2
Length3
Length4
LengthText2
LengthText3
LengthText4
FeetInch2
FeetInch3
FeetInch4
Feet2
Feet3
Feet4
Inch2
Inch3
Inch4
TextAng
Revisions block
Section header
Drawing scale
Page#
Revisions block.99
Title.181
Drawing scale.13
Callout
Callout - bent
Line with extensions
Basic
Visio 00
Circle
Rectangle
Centerline.3
Row_1
Circle, ellipse
Row_2
Row_3
Row_4
Row_5
Intermediate
Intermediate DFX
Centerline.34
Backstay DXF
Vertical baseline.35
Vertical.20
Photos
Circle.30
visVersion
Rectangle.31
Right triangle
Lower DFX
Diameter outside.54
Diameter outside.21
Horizontal outside.57
Centerline.59
Horizontal outside.39
Vertical.32
Diameter outside.33
Horizontal.37
Horizontal.65
Horizontal.66
5 ruled column.67
Doublers
Circle.14
Centerline.35
Intermediate DXF
Vertical.53
Lower DXF
Vertical.22
Diameter outside.56
Square
Vertical.21
Vertical.24
Covers DXF
Horizontal.25
Horizontal.26
Vertical.27
Vertical.28
Horizontal outside.30
Horizontal.35
Rounded square
Doublers DXF
Arial Unicode MS
Symbol
Wingdings
Arial
SimSun
PMingLiU
MS PGothic
Dotum
Sylfaen
Estrangelo Edessa
Vrinda
Shruti
Mangal
Tunga
Sendnya
Raavi
Dhenu
Latha
Gautami
Cordia New
MS Farsi
Gulim
Times New Roman