Measure Tool
/INITIALIZE
Basic frame around drawing.
utomatically snaps to page size. Move corner control handles to limits of print margins.
Resize Bottom/Left Margin
Resize Top/Right Margin
Rectangle.
with text and connection points. Can be stretched to any dimensions.
Horizontal dimension line with variable dimension line & text positions.
itions.
Change Dimension Height
Reposition Text
Use Drawing Page's Units;.Feet-Inch (1'-0");.Feet (1.00');.Inches;.Feet (1.00ft);.Miles;-Millimeters;-Centimeters;-Meters;-Kilometers
0.00
Use Drawing Page's Units
Don't Show Units
1.00
esc(0)
0;0FT 0IN;0.0FT;0IN;0FT;0MI;0 MM;0 CM;0 M;0 KM
Linear Precision Formatting String
0=Dwg, 1=Arch, 2=Dec Ft, 3+ = other
Horizontal dimension line with text outside extensions with variable dimension line & text positions.
xt position.
0.50
Vertical dimension line with variable dimension line height & text positions.
3-D box with variable depth and orientation.
Use control handle or horizontal/vertical flips to change orientation.
ctive.
Adjust Depth and Orientation
Variable dimension angle, extension line cut-off, dimension line location, & text position.
ition.
0;0DEG;0DEG;0DEG0MIN0SEC;0RAD
Angular Precision Formatting String
0=Dwg, 1=°, 2=deg, 3=° ' "", 4 = rad
Change Dimension Angle
Resize Dimension
Change Extension Line Length
esc(2)
0=Dwg, 1=°, 2=deg, 3=° ' ", 4 = rad
0.0\°
90.0°
0.0
Use Drawing Page's Units;Degrees (10.5°);Degrees (10.5deg);Deg-Min-Sec (10°15°20");Radians
Degrees (10.5°)
0DEG
Select shape and type angle in degrees. Right-click hides/shows text & eccentricity handle.
& handle.
o an ellipse.
Change Curvature
Hide Handle/Text
Use handles to adjust arc size and orientation. Right-click for complementary arc.
ry arc.
entary arc.
arc.
llipse.
Resize Arc
Textbox with field label on top and field below. Field automatically reflects drawing's scale.
0 = top-bottom, 1 = side-side
Label At Left
esc(1)
Textbox with field label on top and field below. Field automatically reflects drawing's title information.
dialog box.
@+
Sea Hood
Text block with centered text. Use as a header/label for a section of a parts list, revisions block, or title block.
tle block.
Textbox with field label on top and field below. Field automatically reflects foreground drawing's page number.
Textbox with field label on top and field below. Field automatically reflects drawing's creator information.
Jeff Stander
Textbox with field label on top and field below. Field automatically reflects drawing's creation date.
ddddd
Textbox with field label on left and field on right. Select and type to edit field.
Double-click to edit field label.
Label Above
box,rectangle,basic
Drag the shape onto the drawing page.
customized by dragging any selection handle.
Horizontal,outside,baseline,dimension,engineering,measure,measurement
Drag onto the page, then drag the line ends to blue x's on the shape to be measured. Right-click for more options.
sition.
Use Drawing Page's Units;Feet-Inch (1'-0");Feet (1.00');Inches;Feet (1.00ft);Miles;Millimeters;Centimeters;Meters;Kilometers
horizontal,dimension,engineering,measure,measurement
bent,annotation,callout,label,comment,redline,note,text,caption,legend,footnote,balloon,bubble,definition,heading
Drag onto the page to add a note, then drag the end of the line to the shape it refers to (red indicates connection).
Reposition Bend
Show Bo&x
<no master>
vertical,dimension,engineering,measure,measurement
Horizontal,baseline,dimension,engineering,measure,measurement
Drag onto the page to add up to 4 baseline dimensions. Drag one line end to baseline and one to first feature.
e dimensions.
Reposition 2nd Dimension Line
Reposition 3rd Dimension Line
Reposition 4th Dimension Line
Change Line Spacing
circle,basic
lly by dragging any selection handle.
posidriv,top,screw,fastener,fastening,anchor
"
Drag onto the page. The size of the shape's selection box is equal to the screw's thread diameter.
_&Resize With Handles
_Hide H&idden Detail
_Simp&lified
countersunk,posidrive,screw,fastener,fastening,anchor
Drag onto the page. Right-click to adjust thread length.
hread length.
Thread Length
Min. bolt length
Min. thread length
Show or hide shape hidden detail.
Limit rangle of movement of control handle to with width-height box.
Custom thread diameter.
Standard thread diameter.
Standard bolt length.
Standard thread length.
Custom bolt length.
Custom thread length.
Choose resizing mode.
Anti-scaling formula.
straight,annotation,callout,label,comment,redline,note,text,caption,legend,footnote,balloon,bubble,definition,heading
centerline,dimension,engineering,measure,measurement
Drag onto the page to indicate the centers of circles and arcs, and to represent symmetry.
sshair.
Reposition Lower-Left of Crosshairs
Reposition Upper-Right of Crosshairs
rectangle,box,shadow,shadowed,basic
shadow.
dow.
triangle,basic,right
at can be customized by dragging any selection handle.
raised,ck,posidriv,screw,fastener,fastening,anchor
table thread length.
vertical,outside,dimension,engineering,measure,measurement
Square,box,basic
stomized by dragging any selection handle.
Arc,3pt
Drag to add an arc defined by 3 points.
red arc.
les.
Reposition Perimeter Point
measure,tool
Drag onto the page, then attach to a shape and enter dimension text to change the location of that shape.
Length =
{5D50005D-537C-4738-9C46-130C74335A6D}
Annotation
Measure tool
<no master> Length = 1"
angle,even,dimension,engineering,measure,measurement
Degrees
raised,ck,slotted,screw,fastener,fastening,anchor
able thread length.
label,callout,note,caption,section,bracket,subset,text
Drag onto the page to identify a sectional view. Right-click to hide the bottom arrow.
Reposition Line End
Hide &Bottom Arrow
angle,outside,dimension,engineering,measure,measurement
Show Extensions
Show extension lines.
@
Cross-section and Starboard Side VIew
3/4"
Feet-Inch (1'-0")
0FT 0IN
1/4"
1 1/4"
1 3/4"
2'-2 7/8"
Callout - bent
2"
4 3/4"
1'-10 1/8"
3/16"
6"
2 3/4"
1"
2'-9 3/16"
2'-7 15/16"
1 1/2"
1/2"
2'-5 3/8"
2'-4 1/4"
Section 1
4 7/16"
1/16"
4 11/16"
2'-6 5/8"
60.0°
2'-9 7/16"
2'-5 3/4"
Construction Photos
Finished Photo
C:\Program Files (x86)\Microsoft Office\Office14\visio content\1033\ANNOT_U.VSS
C:\Program Files (x86)\Microsoft Office\Office14\visio content\1033\BASIC_U.VSS
C:\Program Files (x86)\Microsoft Office\Office14\visio content\1033\DIMENG_U.VSS
C:\Program Files (x86)\Microsoft Office\Office14\visio content\1033\FASTN1_U.VSS
C:\Program Files (x86)\Microsoft Office\Office14\visio content\1033\DRAWTL_U.VSS
C:\Program Files (x86)\Microsoft Office\Office14\visio content\1033\EEFUND_U.VSS
C:\Program Files (x86)\Microsoft Office\Office14\visio content\1033\EESWCH_U.VSS
C:\Program Files (x86)\Microsoft Office\Office14\visio content\1033\TITLE_U.VSS
Guide
TheDoc
Scale.2
Gesture Format
Frame
AntiScale
Basic
Visio 00
Rectangle
Dimension
Horizontal
LPrec
LUnits
ShowUnits
Extensions
Angle
LUnitsFactor
FormatString
LengthText
Length
LPFString
LPrecInd
LPrecVal
LUnitsInd
LUnitsVal
ShowUnitsInd
ShowUnitsVal
FeetInch
Feet
Inch
InchPrec
LocEndX
LocEndY
visObjectType
DrawingUnitFactor
Horizontal outside
Vertical
Basic Shadow
Visio 02
3-D box
ScaleFactor
Page#.5
Row_1
Angle even
APrec
AUnits
AUnitsFactor
AngleText
APFString
APrecInd
APrecVal
AUnitsInd
AUnitsVal
Hairline
Arc - graphical
Arc - numeric
Block
Block label left
Title
BoxType
SizeFactor
General Dimensions
Square
Page#
Section header
Date
Scale
RatioLeft
RatioRight
PageScale
DrawingScale
Drawn by
Block - side label
Raised ck. (slotted)
Row_2
Horizontal.34
Row_3
Raised ck. (slotted).25
Scale.18
Row_4
Row_5
Rectangle.19
visVersion
Rectangle.38
Vertical.155
Horizontal.50
Arc: 3pt.
visAecPage
SolSH
Horizontal.108
ShapeClass
ShapeType
SubShapeType
Horizontal outside.20
LastFormat
Vertical.48
Horizontal.33
Horizontal.21
Rectangle.53
Rectangle.54
Angle even.37
Callout
Rectangle.55
Posidriv top 2.100
Horizontal.101
Rectangle.120
Posidriv top 2.104
Horizontal.57
Horizontal.107
Rectangle.65
Vertical.23
Horizontal.29
Posidriv top 2.111
Rectangle.58
Rectangle.59
Rectangle.60
Rectangle.61
Rectangle.62
Rectangle.63
Rectangle.64
Rectangle.66
Posidriv top 2.114
Horizontal baseline
Length2
Length3
Length4
LengthText2
LengthText3
LengthText4
FeetInch2
FeetInch3
FeetInch4
Feet2
Feet3
Feet4
Inch2
Inch3
Inch4
TextAng
Rectangle.67
Rectangle.68
Black fill
Horizontal.42
Rectangle.125
Rectangle.173
Angle outside
Horizontal.166
Vertical.129
Vertical.130
Vertical.56
Vertical.132
Horizontal.172
Vertical.134
Vertical.136
Horizontal.135
Horizontal.141
Vertical.127
Rectangle.138
Vertical.30
Photos
Vertical.70
Circle
Rectangle.145
Vertical.76
msvNoAutoConnect
Horizontal.77
Vertical.78
Fastener
Horizontal.149
Hidden detail
Posidriv top 2
AskOnDrop
Thread
Diameter
Detail
MThread
SetOnDrop
MWidth
Sizing
HasText
Threads
Countersunk (posidriv)
ThreadLen
MinLen
TLen
CHLimit
MLength
MThreadLen
LimitHeight
LimitWidth
Rectangle.79
Vertical.32
Horizontal.81
Callout - straight
Centerline
Horizontal.80
Vertical.84
Vertical.85
Horizontal.86
Vertical.144
Horizontal.160
Frame.6
Shadowed box
Right triangle
Vertical.110
Vertical.117
Raised ck. (posidriv)
Vertical outside
Arial Unicode MS
Symbol
Wingdings
Arial
SimSun
PMingLiU
MS PGothic
Dotum
Sylfaen
Estrangelo Edessa
Vrinda
Shruti
Mangal
Tunga
Sendnya
Raavi
Dhenu
Latha
Gautami
Cordia New
MS Farsi
Gulim
Times New Roman
Comic Sans MS